Steps to follow before, during and after sample collection
Whether it’s choosing the location for a new home or rotating crops that feed an entire country, soil sampling data is used to make important, long-lasting decisions. Recording soil sampling data accurately and properly handling the collected samples can save time, reduce cost and streamline operations.
Lone Star Drills is here to help you learn what you should do before, during and after your soil sampling project to keep the process efficient and accurate.
Before You Start
Establishing a recording system prior to entering your sample site is crucial to accurate data recording. This includes setting up a dedicated soil sample log and pre-labeled containers. Preparing materials beforehand allows you to focus on recording data accurately and implementing the proper sampling equipment.
Start by assigning the overall sample area a unique identifier such as SA-1 — Sample Area One. From there, the terrain layout and soil sample requirements will largely dictate the labeling method you use, but sample areas can be broken down further into sample sites, like SS-1, SS-2 and so on. You can then assign borings to specific sample sites within the overall sample area and label individual boring containers — as well as the logbook —with this information.
Referencing and recording data will be much more fluid after establishing an identification system. From there, you can decide what specifics should be recorded on the individual sample containers and what should be in the logbook. For example, it’s good practice to record boring coordinates, dates and times in both locations.
During the Process
Once containers have a label, the logbook is set up and data recording priorities have been established, you should note the date and time you arrive at the sample area and the times for every boring within a sample site. Be sure to record the last boring time along with the time range for the sample site, SS-1, before moving on to SS-2 and starting the process over. With soil conditions constantly changing, the tiniest detail from time of year to time of day can impact the results and how they’re interpreted.
Take note of the weather conditions upon arriving at the sample area and consider how these may change during the collection process. Also note the soil conditions. Soil condition descriptors can be anything that seems relevant, such as smooth, gritty, sand, clay and more.
Record any equipment changes due to changing soil conditions, whether that’s switching augers, using hand sampling tools or bringing in an entirely different drill rig. Equipment model names and drill types are important to note. This may be the same for an entire sample area or may change from site to site. Additionally, note the borehole depth and size of the soil sampler. At this point in data recording, consider noting the blow counts needed to drive in the soil sampler to the desired depth. This should be noted for every borehole.
Photos are also an important part of the documentation process. Pictures of the sampling process at every borehole can be useful and shed light on mistakes when reviewed later. Additionally, you should photograph the surrounding soil, entire soil sample and any individual sections chosen from the sample for later reference and note-taking confirmation. The camera used for site photography can also provide an excellent third source for referencing soil date and time in addition to the logbook and containers.
Different industries and contractors establish their own standard operating procedures for handling and storing samples. However, an airtight container for storage in the field is essential. From there, place the samples in the shade, preferably in a cooler, until they can be refrigerated or sent to a lab. Individual labs may offer further shipping and storage recommendations.
While the impact of soil sampling may seem to rely solely on the trusted systems set in place — like a testing lab — to provide reliable data, it’s important to remember that a contractor’s actions will determine how closely the soil sample that arrives at the lab represents the soil at the jobsite. If you have any questions about soil sample drilling, don’t hesitate to contact Lone Star Drills.