The LST1G+HD geotechnical drill rig offers enhanced power and capabilities compared to the LST1G+, including a planetary reduction gearbox for up to 1,100 foot-pounds of torque, increased pull/push-back force and a strengthened steel frame. The drill includes a tower, cathead, pulley and 140-pound manual safety hammer to facilitate standard penetration testing. A 25-horsepower Honda gas engine with EFI and electronic governor powers the 3,000-psi hydraulic system, which achieves a rotary speed of 100 rpm with as much as 1,100 foot-pounds of torque. The drill can be mounted to the bed of a small truck or flatbed using specially designed frames.

• Drilling Depth: 100 ft (30.5 m)
• Borehole Diameter: 6 in (15 cm)
• Pull/Push-Back Force: Up to 8,500 lbs (3,855.5 kg)
• Soil Types: Sand, clay & soft rock formations
• Applications: Soil sampling, geotechnical testing, standard penetration testing (SPT) and well monitoring

Package Includes:

• Honda  iGX800 25-horsepower gas engine
• 3,000-psi hydraulic system
• Tower and cathead for SPT
• Hydraulic lift cylinder to raise and lower the mast
• Tool box & spare parts

Augers & Bits:

• 3- to 8-inch diameter D-series augers available in 3-, 4- or 5-foot lengths
• 6-inch outside diameter (2.75-inch inside diameter) or 8-inch outside diameter (3.75-inch inside diameter) hollow stem augers
• Standard point and blade for soft soil, carbide blade for medium to hard soil, and rock tooth auger for hardpan and weathered formations

Trailer:

• Single axle
• 3,500-pound (1,590-kg) rating
• Towable by ATV or truck
• Three leveling jacks
• 2-inch ball coupler
• Spare tire

Optional Components:

• 140-pound manual safety hammer
• Soil Sampling Kit
• Split spoon samplers
• AWJ drilling rod
• Anchor kit to push beyond the weight of the trailer
• Specially designed frame to mount on a truck or flatbed

All trailer-mounted drills can ship fully assembled in a 20-foot container or knocked down and palletized.